HP 530 - Show Copy; Show Tech

9-57
Command Line Reference
Flash/File Commands
show copy
This command displays the status of the last copy operation (ftp/scp/tcfp).
Syntax
show copy
Default Setting
N/A
Command Mode
Manager Exec
Global Configuration
Example
show tech
This command displays the output of a predefined command sequence used
by technical support.
Syntax
show tech
Default Setting
N/A
Command Mode
Manager Exec
Global Configuration
ProCurve Access Point 530# show copy
------------------------------------------------------------
Copy Operation Status (FTP/SCP/TFTP)
Last software image (flash) copy result: not initiated
Last configuration file copy result: not initiated
ProCurve Access Point 530#