EasyManua.ls Logo

HP 530 - Copy Factory-Default; Copy Running-Config

HP 530
562 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9-53
Command Line Reference
Flash/File Commands
N/A
Command Mode
Manager Exec
Example.
copy factory-default
This command resets configuration file to the factory-default configuration
on the device
.
Syntax
copy factory-default <startup-config> | <custom-default>
startup-config-Reset the startup configuration file to contain the same
settings as the factory default configuration file.
custom-default-Reset the default configuration file to contain the same
settings as the factory default configuration file.
Default Setting
N/A
Command Mode
Manager Exec
Example
copy running-config
This command saves the running-default to a configuration file on the device.
Syntax
copy running-default <startup-config> | <custom-default>
ProCurve Access Point 530# copy startup-config ftp
192.168.1.52 copystart user-name chris password open
ProCurve Access Point 530# copy startup-config tftp
192.168.1.52 copystart
ProCurve Access Point 530# copy factory-default startup-
config
ProCurve Access Point 530#

Table of Contents

Other manuals for HP 530

Related product manuals