HP 530 User Manual

9-73
Command Line Reference
MAC Address Authentication
Default
None
Command Mode
WLAN Interface Configuration
Example
mac-auth-remote
This command enables remote MAC address authentication by using the
RADIUS authentication server settings on this WLAN. The no version of the
command disables remote MAC authentication on the BSS.
Syntax
mac-auth-remote
no mac-auth-remote
Default
None
Command Mode
WLAN Interface Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# mac-auth-local Bob
accept-list
ProCurve Access Point 530(radio1-wlan1)#
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# mac-auth-remote
ProCurve Access Point 530(radio1-wlan1)#

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g