To Next Page

To Previous Page

9-42

Command Line Reference

Network Management Application Commands

snmp-server port

This command specifies the port number that the SNMP server will use on

this device.

Syntax

snmp-server port

<port>

• port - The number specifying the port to which the SNMP server will

listen. This must be an unused port on the AP.

Default Setting

161

Command Mode

Global Configuration

Example

ProCurve Access Point 530# configure

ProCurve Access Point 530(config)# snmp-server port 161

ProCurve Access Point 530(config)#

Other manuals for HP 530

Questions and Answers:

Need help?

Do you have a question about the HP 530 and is the answer not in the manual?

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g