HP 530 User Manual

6-13
Wireless Interface Configuration
Configuring the Radio
Note When the radio is configured for auto channel selection, any radio mode
changes result in a five- to ten-second delay as the optimum radio channel
is determined and selected.
■ Maximum Stations: The maximum number of stations allowed to access
the applicable radio at any one time. (The default is 256.)
■ [Update]: Updates the radio parameters.
Figure 6-2. Configuring Basic Radio Settings
To Modify Basic Radio Settings:
1. Select Network Setup > Radio.
2. Select the radio channel from the drop-down.
If you are deploying access
points in the same area, see the key points summarized in section
“Over-
view” on page 6-3
.
3. To set a limit on the number of stations accessing the access point, enter
a value within the applicable range in the Maximum Stations field.
4. Click
[Update].

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g