HP 530 - Page 192

6-40
Wireless Interface Configuration
Managing Multiple WLAN (BSS/SSID) Interfaces
To display WLAN interface settings, use the show wlan command, as shown
in the following example.
ProCurve Access Point 530(radio1)# show wlan
All WLANs on Radio 1:
# WLAN BSSID VLAN Security Status
------------------------------------------------------------------------------
-
1 PR3_WLAN 00:14:C2:A7:11:A0 1 (U) No Sec. Disabled
2 SSID 2 not assigned yet none(-) No Sec. Disabled
3 SSID 3 not assigned yet none(-) No Sec. Disabled
4 SSID 4 not assigned yet none(-) No Sec. Disabled
5 SSID 5 not assigned yet none(-) No Sec. Disabled
6 SSID 6 not assigned yet none(-) No Sec. Disabled
7 SSID 7 not assigned yet none(-) No Sec. Disabled
8 SSID 8 not assigned yet none(-) No Sec. Disabled
9 SSID 9 not assigned yet none(-) No Sec. Disabled
10 SSID 10 not assigned yet none(-) No Sec. Disabled
11 SSID 11 not assigned yet none(-) No Sec. Disabled
12 SSID 12 not assigned yet none(-) No Sec. Disabled
13 SSID 13 not assigned yet none(-) No Sec. Disabled
14 SSID 14 not assigned yet none(-) No Sec. Disabled
15 SSID 15 not assigned yet none(-) No Sec. Disabled
16 SSID 16 not assigned yet none(-) No Sec. Disabled
ProCurve Access Point 530(radio1)#