HP 530 User Manual

7-30
Wireless Security Configuration
Manual Configuration Using the CLI
The following example shows how to set to set the security key value using
the wpa-pre-shared-key command.
Note Supported stations must be WPA-enabled and configured with the same
personal key.
The personal key must be a string of 8 to 63 characters.
Shared secret keys can include spaces and special characters if the key is
placed inside quotation marks (as in “goodsecret !”). If the key is a string of
characters with no spaces or special characters in it, the quotation marks are
not necessary.
Using the CLI to Configure WPA-802.1X. The following commands
configure the access point to use the WPA-802.1X security mode, to accept
both the WPA and WPA2 stations, and to allow pre-authentication.
Note WPA-802.1X is the recommended security mode. The incorporation of the
RADIUS server makes it superior to the WPA-PSK security mode.
ProCurve Access Point 530(radio1-wlan1)#wpa-pre-
shared-key goodsecret
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)#security wpa-802.1x
ProCurve Access Point 530(radio1-wlan1)#wpa-allowed
ProCurve Access Point 530(radio1-wlan1)#wpa2-allowed
ProCurve Access Point 530(radio1-wlan1)#rsn-preauthentication
ProCurve Access Point 530(radio1-wlan1)#

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g