4-13
Using the ProCurve Web Browser Interface
Web Interface Screens
when the access point is using "wpa-psk" security on the WLAN. If the
WLAN is set to “static-wep” or “no-security”, this parameter displays “n/
a” as it does not apply.
■ Received Packets: Indicates total packets received by this access point.
■ Received Bytes: Indicates total bytes received by this access point.
■ Sent Packets: Indicates total packets sent by this access point.
■ Sent Bytes: Indicates total bytes sent by this access point.
■ [Refresh]: Refreshes the Wireless station results.
To Next Page
Loading...
