HP Vectra User Manual

CMOS RAM Memory
The 50 bytes of CMOS RAM are used to store system parameters
when power is removed from the system. These bytes are all
currently used
or reserved; there are no user-definable bytes.
Applications may read these bytes
to determine system
configuration,
or write to them provided the byte definitions are
adheared to. The function
of each byte is listed in the following
table. Byte definitions are contained in the HP Vectra Technical
Reference Manual Volume 2: System BIOS.
42 Processor Board

HP Vectra Specifications

General

Processor	Intel Pentium
RAM	Up to 128 MB
Storage	HDD (capacity varies by model)
Operating System	Windows 95
Graphics	Integrated
Ports	Serial, Parallel
Expansion Slots	ISA, PCI