D_boot_cons.doc 194 Tue Jul 2 10:44:54 1996
194
The Boot Console Interface
Displaying PIM Information
Displaying PIM Information
The pim command allows you to display the most recent PIM information
for the specified fault type. To display PIM information for a specific fault,
from the Service Menu, type the following at the prompt:
Service Menu: Enter command > pim processor_number
You can use pim in the following ways:
pim - gives all fault types
pim 0 - HPMC information on processor
pim 0 fault_type - fault type information on processor
To Next Page
Loading...
