Configuring the date and time and system
defaults
Setting the Date and Time
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Date and Time and press Enter.
2. Select a setting and press Enter, then complete your entry and press Enter again.
a. Date (mm-dd-yyyy)—Enter the date in a month-day-year (mm-dd-yyyy) format.
b. Time (hh:mm:ss)—Enter the time in a 24–hour format (hh:mm:ss) format.
c. Time Zone—Use the up and down arrow keys to select your current time zone for the system
d. Daylight Savings Time
• Enabled—Adjusts the local time displayed by one hour for Daylight Savings Time.
• Disabled—Does not adjust the local time displayed for Daylight Savings Time.
e. Time Format
• Coordinated Universal Time (UTC)—Calculates the time stored in the hardware Real Time Clock
(RTC) from the associated Time Zone setting.
• Local Time—Removes the use of the Time Zone setting. This option is useful for addressing
interaction issues between Windows operating systems set in Legacy BIOS boot mode.
3. Press F10.
Resetting system defaults
System Default Options
• Restore Default System Settings
• Restore Default Manufacturing Settings
• Default UEFI Device Priority
• User Default Options
Restore Default System Settings
Use this option to reset all BIOS configuration settings to their default values and immediately and
automatically restart the server.
Configuring the date and time and system defaults 127
To Next Page
Loading...
