HPE ProLiant Gen9

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Storage Options > Embedded Storage Boot Policy and press Enter.
2. Select a storage controller and press Enter.
3. Select a setting and press Enter.
a. Boot All Targets —All valid boot targets attached to the storage controller are available to the UEFI
Boot Order list.
b. Boot Limit to 3 Targets—A maximum of three boot targets attached to the storage controller are
available to the UEFI Boot Order list.
c. Boot No Targets—No boot targets attached to the storage controller are available to the UEFI Boot
Orderlist.
4. Press F10.
PCIe Storage Boot Policy
Use this option to select the UEFI BIOS boot targets for storage controllers in PCIe slots.
NOTE:
This setting overrides the Fibre Channel/FCoE Scan Policy setting for Fibre Channel controllers in PCIe slots.
Setting the PCIe storage boot policy
Prerequisite
Boot Mode is set to UEFI Mode.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Storage Options > PCIe Storage Boot Policy and press Enter.
2. Select a storage controller and press Enter.
3. Select a setting and press Enter.
4. Press F10.
PCIe Storage Boot Policy 71