HPE ProLiant Gen9

UEFI System Utilities overview
Launching the System Utilities
Procedure
1. Optional: If you access the server remotely, start an iLO remote console session.
a. Open a browser and enter https://<iLO host name or IP address> to log on to the iLO web
interface.
b. On the login page, do one of the following:
• Enter a directory or local user account name and password, and click Log In.
• Click the HPE Zero Sign In button.This button is displayed when iLO is configured for Kerberos
network authentication.
c. Navigate to the Remote Console > Remote Console page.
d. Verify that your system meets the requirements for using the remote console application you want to
use.
e. Click the launch button for your selected application.
Alternatively, you can click an Integrated Remote Console link on the Overview page.
2. Restart or power on the server.
The server restarts and the POST screen appears.
3. Press F9.
The System Utilities screen appears.
Navigating the System Utilities
Procedure
1. Launch the System Utilities and do one of the following.
a. To navigate through the screens and modify settings, press any of the navigational keys. Key functions
are shown at the bottom of every System Utilities screen.
b. To access the UEFI System Utilities and Shell Command Mobile Help for HPE ProLiant Gen9 Servers
and HPE Synergy, scan the QR code on the bottom of the System Utilities screen with your mobile
device.
2. To exit the System Utilities screen and reboot the server, press Esc until the main menu is displayed, and
then select one of the following options:
14 UEFI System Utilities overview