HPE ProLiant Gen9

d. The correct startup.nsh script file location in attached media or a network location is specified. If it is
in attached media, the startup.nshscript must be either inside the fsX:\ or the fsX:\efi\boot\
directory.
e. The .nsh script only contains supported commands.
f. Your system has enough RAM memory to create RAM disks during automated script execution.
g. Any OS boot loader or diagnostics application launched using the .nsh script is supported to run in
UEFI the environment.
2. Try the deployment again.
Cannot configure Legacy BIOS Boot Order options
Symptom
You changed the Boot Mode to Legacy BIOS Mode, and you cannot configure Legacy BIOS Boot Order
options.
Cause
Boot Mode was changed to Legacy BIOS Mode, and the system must be rebooted.
Action
Reboot the system.
Cannot execute Option ROM for one or more devices
Symptom
You cannot execute Option ROM for one or more devices.
Cause
The amount of available Option ROM space has been exceeded.
Action
Disable any unnecessary option ROMs (such as PXE).
Cannot find a new network or storage device in the boot
order list
Symptom
You connected a network or storage device, and it does not appear in the UEFI Boot Order list or the Legacy
BIOS Boot Order list.
Cause
Newly-added devices do not appear in the boot order list until you reboot the system.
Cannot configure Legacy BIOS Boot Order options 137