HPE ProLiant Gen9

Power
Management
option
Power Profile settings
Balanced Power
and Performance
Minimum Power
Usage
Maximum
Performance
Custom
Intel QPI Frequency Auto Minimum QPI
Speed
Auto All available
options.
Energy/
Performance Bias
Balanced
Performance
Power Savings
Mode
Maximum
Performance
All available
options.
Maximum Memory
Bus Frequency
Auto 1333 MHz Auto All available
options.
Channel
Interleaving
Enabled Disabled Enabled All available
options.
Maximum PCI
Express Speed
Maximum
Supported
PCIe Generation 1 Maximum
Supported
All available
options.
Intel DMI Link
Frequency
Auto Auto Auto All available
options.
You can configure Power Management settings in either of two ways:
• Use Intelligent Provisioning Quick Configs to select a basic policy for performance versus power usage.
See the Intelligent Provisioning User Guide for HPE ProLiant Gen9 Servers and HPE Synergy on the
Hewlett Packard Enterprise website (http://www.hpe.com/info/intelligentprovisioning/docs).
• Use the System Utilities Power Management options to configure individual settings as described in the
following procedures.
Setting a power profile
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power Management > Power Profile and press Enter.
2. Select a setting and Enter.
a. Balanced Power and Performance—Provides optimum settings to maximize power savings with
minimal impact to performance for most operating systems and applications.
b. Minimum Power Usage—Enables power reduction mechanisms that can negatively affect
performance. This mode guarantees a lower maximum power usage by the system.
c. Maximum Performance—Disables all power management options that can negatively affect
performance.
d. Custom—Enables you to configure settings for your environment.
3. Press F10.
Setting a power profile 77