HPE ProLiant Gen9

Configuring PCI devices
PCI Device Enable/Disable
Use this option to enable or disable embedded and added-in PCI devices. Disabling devices reallocates the
resources (memory, I/O, and ROM space and power) that are normally allocated to the device. By default, all
devices are enabled.
Enabling or disabling a PCI device
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > PCI Device Enabled/Disable and press Enter.
2. Select a device on the system from the list and press Enter.
3. Select Enable or Disable and press Enter.
4. Press F10.
Configuring PCI devices 107