HPE ProLiant Gen9

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power Management > Minimum Processor Idle Power Core C-State and press Enter.
2. Select a setting and press Enter.
a. C6 State
b. C3 State
c. C1E State
d. No C-states
3. Press F10.
Minimum Processor Idle Power Package C-State
When the Power Profile is set to Custom, use this option to configure the lowest processor idle power state
(C-State). The processor automatically transitions into package C-States based on the Core C-States in
which cores on the processor have transitioned. The higher the package C-State, the lower the power usage
of that idle package state.
NOTE:
This option is available on servers with Intel processors.
Setting the Minimum Processor Idle Power Package C-State
Prerequisite
Power Profile is set to Custom.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Power Management > Minimum Processor Idle Power Package C-State and press Enter.
2. Select an option and press Enter.
a. Package C6 (retention) State
b. Package C6 (non-retention) State
c. No Package State
3. Press F10.
Advanced Power Options
• Intel QPI Link Power Management
• Intel QPI Link Frequency
• Energy/Performance Bias
Minimum Processor Idle Power Package C-State 79