HPE ProLiant Gen9

Cannot network boot with the downloaded image file
Symptom
Booting from the image specified in the URL fails.
Solution 1
Cause
The image is not signed and Secure Boot is enabled.
Action
1. Ensure that the image is signed and that its Secure Boot settings are correct. Ensure that the image is
signed and that its Secure Boot settings are correct. .
2. Try to download the file in the URL again.
Solution 2
Cause
The downloaded file is corrupt.
Action
1. Select a new file.
2. Repeat the URL configuration, specifying the new file.
3. Try to download the new file in the URL.
Cannot deploy from the UEFI Shell script
Symptom
You attempted to deploy an OS using the UEFI Shell script and you see an error message that the
deployment failed.
Cause
Configuration settings are not correct.
Action
1. Verify the following.
a. The Embedded UEFI Shell interface is added to the UEFI Boot Order list or the One-Time Boot
Menu.
b. When added to the UEFI Boot Order list, the Embedded UEFI Shell interface is the first boot option in
the UEFI Boot Order list so that it overrides other boot options to load.
c. UEFI Shell Script Auto-Start is enabled.
136 Cannot network boot with the downloaded image file