HPE ProLiant Gen9

Setting the network location for the Shell auto-start script
Prerequisites
• Boot Mode is set to UEFI Mode.
• Embedded UEFI Shell is enabled.
• Shell Auto-Start Script Location is set to Network Location.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Embedded UEFI Shell > Network Location for Shell Script-Auto Start and press Enter.
2. Enter a network location and press Enter. Use HTTP or FTP format and an IPv4 server address or host
name.
3. Press F10.
Setting the network location for the Shell auto-start script 75