HPE ProLiant Gen9

Setting the Embedded Diagnostics viewing mode
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > Embedded Diagnostics Mode and press Enter.
2. Select a setting and press Enter.
a. Auto—Displays Embedded Diagnostics in graphical mode.
b. Text Mode—Displays Embedded Diagnostics in text mode. Select this if you connect to the server
using a BIOS serial console.
3. Press F10.
No-Execute Protection
Use this option to enable or disable protection against malicious code and viruses on your system. When
enabled, memory is marked as non-executable unless the location contains executable code. If viruses
attempt to insert and execute code from non-executable memory locations, these viruses are intercepted and
an exception is generated.
NOTE:
Enable this option if you are using a Virtual Machine Manager, such as VMware ESX/ESXi and Windows
Hyper-V.
Enabling or disabling no-execute virus protection
Prerequisites
Your operating system must support this option for you to enable it.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > Server Security > No-Execute Protection and press Enter.
2. Select a setting and press Enter.
a. Enabled
b. Disabled
3. Press F10.
Processor AES-NI Support
Use this option to enable or disable the Advanced Encryption Standard Instruction Set in the processor.
Setting the Embedded Diagnostics viewing mode 97