HPE ProLiant Gen9

Configuring Power Management
Power Management options
• Power Profile
• Power Regulator
• Minimum Processor Idle Power Core C-State
• Minimum Processor Idle Power Package C-State
• Advanced Power Options
Power Profile
Use this option to select a power profile based on power and performance characteristics. Balanced Power
and Performance, the default setting, provides optimum settings to maximize power savings with minimal
impact to performance for most operating systems and applications.
The following table shows Power Profile settings and the Power Management options supported by each
profile. For a description of each option, see the following procedures.
NOTE:
• Not all the options in this table are adjustable on all servers. However, even if you do not have the option
of adjusting some of these settings, they default to the values shown here.
• When you select Custom as your Power Profile setting, all available settings for the Power Management
options are available to customize your configuration.
Power
Management
option
Power Profile settings
Balanced Power
and Performance
Minimum Power
Usage
Maximum
Performance
Custom
Power Regulator Dynamic Power
Savings Mode
Static Low Power
Mode
Static High
Performance Mode
All available
options.
Minimum Processor
Idle Power Core C-
State
C6 State C6 State No C-states All available
options.
Minimum Processor
Idle Power Package
C-State
Package C6
(retention) State
Package C6
(retention) State
No Package State All available
options.
Advanced Power Management option
Intel QPI Link
Power Management
Enabled Enabled Disabled All available
options.
Table Continued
76 Configuring Power Management