HPE ProLiant Gen9

◦ BIOS/Platform Configuration (RBSU)
◦ iLO 4 Configuration Utility
◦ Other system-specific devices, such as installed PCIe cards, NICs, and Smart Arrays. For example,
Embedded FlexibleLOM Port 1.
NOTE:
Throughout the menus, the interface attempts to display the proper marketing name for installed PCI
devices. If the interface does not recognize a device, it assigns a generic label to the device, such as a
non-HPE name. This generic labeling does not affect the functionality or operation of the device.
Devices vary based on your system.
• One-Time Boot Menu—Displays options for selecting a boot override option and running a UEFI
application from a file system.
• Embedded Applications—Displays options for viewing and configuring:
◦ Embedded UEFI Shell
◦ Integrated Management Log (IML)
◦ Active Health System Log (AHS)
◦ Firmware Update
◦ Embedded Diagnostics
◦ Intelligent Provisioning
• System Information—Displays options for viewing the server name and generation, serial number,
product ID, BIOS version and date, power management controller, backup BIOS version and date, system
memory, and processors.
• System Health—Displays options for viewing the current health status of all devices in the system.
• Exit and resume system boot—Exits the system and continues the normal boot process.
• Reboot the System—Exits the system and reboots it by going through the UEFI Boot Order list and
launching the first bootable option in the system. For example, you can launch the UEFI Shell, if enabled
and listed as the first bootable option in the list.
• Select Language—Enables you to select a language to use in the user interface. English is the default
language.
Common setup and configuration FAQs
1. How do I access the UEFI System Utilities?
See Launching the System Utilities.
2. How do I update the firmware or system ROM?
See Updating firmware or system ROM.
3. How do I use the Firmware Update application to upgrade the system ROM to the version
included on the USB key already inserted into the server?
16 Common setup and configuration FAQs