HPE ProLiant Gen9

Setting the boot order policy
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Boot Options > Boot Order Policy and press Enter.
2. Select a setting and press Enter.
a. Retry Boot Order Indefinitely—Configures the system to continuously attempt the boot order until a
bootable device is found.
b. Attempt Boot Order Once—Configures the system to attempt to execute all items in the boot menu
once, and halts the system.
c. Reset After Failed Boot Attempt—Configures the system to attempt to execute all items once, and
reboots the system.
3. Press F10.
UEFI Boot Order
Use this option to change the order in which entries in the UEFI Boot Order list boot.
You can also configure the UEFI Boot Order list using the RESTful Interface Tool. See the RESTful Interface
Tool documentation at: http://www.hpe.com/info/restfulinterface/docs..
Changing the UEFI boot order
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Boot Options > UEFI Boot Order and press Enter.
2. Use the arrow keys to navigate within the boot order list.
3. Press the + key to move an entry higher in the boot list.
4. Press the - key to move an entry lower in the list.
5. Press F10.
Advanced UEFI Boot Maintenance
• Add Boot Option
• Delete Boot Option
Add Boot Option
Use this option to select an x64 UEFI application with an .EFI extension, such as an OS boot loader or other
UEFI application, to add as a new UEFI boot option.
Setting the boot order policy 59