Huawei FusionModule2000

To Next Page

To Previous Page

Figure 5-39 Removing the mounting plate of a magnetic lock cover

Step 2 Remove the cables for the double-door magnetic lock from the Phoenix terminal

block on the upper frame mounting kit.

Step 3 Replace the magnetic lock. Remove the magnetic lock from the

xing plate using

the delivered hex key, as shown in Figure 5-40.

Figure 5-40 Removing a magnetic lock

Step 4 Connect the magnetic lock cable to the new magnetic lock, and secure the

magnetic lock to the xing plate using the delivered hex key, as shown in Figure

5-41.

FusionModule2000 Smart Modular Data Center

Maintenance Guide (Fusion Module Actuator) 5 Parts Replacement

Huawei FusionModule2000 - Page 98