● SSH is used only for advanced maintenance.
● Change the preset password in your rst login to the controller over SSH.
● Except for password changes, do not perform any other operations. Otherwise,
the controller cannot work properly.
● Except for password changes, operations resulting in controller faults are
beyond the warranty scope.
● Remember the new password.
When Windows accesses the controller over SSH, you need to use client software such as
PuTTY.
Procedure
Step 1 Log in to the controller over SSH.
Step 2 Specify User name and Password. The preset user name and password are
enspire and Changeme respectively, as shown in Figure 4-46.
Figure 4-46 Entering the user name and password
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width) 4 ACC Introduction
Issue 17 (2020-10-22) Copyright © Huawei Technologies Co., Ltd. 130
To Next Page
Loading...
