TE20 Videoconferencing Endpoint
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Upgrade Password
The upgrade password is required when you use the upgrade tool to upgrade the endpoint.
By default, the upgrade password is Change_Me.
You are advised to change the password at the first login and regularly change the password
afterward. On the web interface, choose System Settings > Security > Upgrade password,
and change the password.
If the default upgrade password is used, a confirm dialog box will be displayed after you choose to
upgrade your endpoint on its remote control UI or web interface. The upgrade will start only after you
confirm it.
AirPresence Password
The AirPresence password is used by an AirPresence client to connect to the endpoint. Users
can download the AirPresence client from the endpoint web interface. After the AirPresence
client successfully connects to the endpoint, users can connect the endpoint to presentation
sources and share presentations without the use of any physical ports.
The default AirPresence password is Change_Me.
You are advised to change the password at the first login and regularly change the password
afterward. The path for changing the password on the web interface is: System Settings >
Security > AirPresence
After being connected to the endpoint, the AirPresence client has the same rights as the api account.
Keep the password secure.
AirPresence Whitelist
To enhance connection security, configure the AirPresence whitelist.
Before configuring the Wi-Fi hotspot whitelist, ensure that Connection over Wi-Fi only have been
enabled.
Configure the AirPresence whitelist as follows:
1. Choose System Settings > Security > AirPresence.
2. Click Whitelist.
3. Select Enable.
You can modify the whitelist only after selecting Enable here.
4. Click Add and set IP address and Mask length.
5. Click OK. The settings take effect immediately.
Information Required for Connecting to the Videoconferencing Network
Management System
The endpoint communicates with and is remotely managed by the videoconferencing network
management system using SNMP.
The videoconferencing network management system implements the following:
To Next Page
Loading...
