Chapter 11 Warranty
356
11.5 Conditions of Conformance with Applicable Standards/Regulations,
Etc., and Applications
(1) If our product is combined with another product or any system, device, etc., used by the
customer, the customer must first check the applicable standards, regulations and/or rules.
The customer is also responsible for confirming that such combination with our product
conforms to the applicable standards, etc. In such a case we will not be liable for the
conformance of our product with the applicable standards, etc.
(2) Our product is for general industrial use. It is not intended or designed for the applications
specified below, which require a high level of safety. Accordingly, as a rule our product
cannot be used in these applications. Contact us if you must use our product for any of
these applications:
[1] Medical equipment pertaining to maintenance or management of human life or health
[2] A mechanism or mechanical equipment intended to move or transport people (such
as a vehicle, railway facility or aviation facility)
[3] Important safety parts of mechanical equipment (such as safety devices)
[4] Equipment used to handle cultural assets, art or other irreplaceable items
(3) Contact us at the earliest opportunity if our product is to be used in any condition or
environment that differs from what is specified in the catalog or instruction manual.
11.6 Other Items Excluded from Warranty
The price of the product delivered to you does not include expenses associated with
programming, the dispatch of engineers, etc. Accordingly, a separate fee will be charged in the
following cases even during the warranty period:
[1] Guidance for installation/adjustment and witnessing of test operation
[2] Maintenance and inspection
[3] Technical guidance and education on operating/wiring methods, etc.
[4] Technical guidance and education on programming and other items related to programs
357
Change History
Revision Date Revision Description
2011.11
2012.05
2012.08
2012.12
2013.01
2013.09
2013.11
2014.03
2014.08
2014.12
2015.02
First Edition
Second Edition
• Contents changed and added in Safety Guide
• Number of regenerative resistance revised
• Correction made to calculation of electronic gear ratio for feedback pulse
Third Edition
• Note added for high accel/decal type is not applicable for offboard turning
function
Fourth Edition
• Parameter No.159 added and EMG circuit revised.
Fifth Edition
• Add UL Standard compliance conditions.
• CE Marking support for EtherCAT and EtherNet/IP
• Reviewed the movable angle of rotary actuator
• Notes revised for Pressing Operation and Tension Operation
Sixth Edition
Applicable to DD motor connection
Seventh Edition
Caution added to caution in handling for when turning ON/OFF the power and
inputting emergency stop
7B Edition
Pg. 22 Refer to "How to Read the Model Number."
Pg. 46,63 Change made to ISWA cable
Pg. 255 Change made to detail codes in 1) and 2) in 0E5 Encoder Reception
Error
Eighth Edition
• Applicable to SCON-CAL/CGAL
• Revising made due to model change of teaching pendants
• Applicable to PROFINAT IO
8B Edition
• Colophon Change made in address of Chicago Office
8C Edition
• Pg. 199 Correction made to model cord of absolute battery with holder for
SCON-CA
• Pg. 269 SCON-CA added in Safety Category Application
To Next Page
Loading...
