v Double-click on the Second Disk Rebuild icon.
v The following messages appear on screen:
Do you really want to restore the backup disk on a xxxxx MB drive (Y/N)?
Note: xxxxx specify the disk size.
v Type Y then press the Enter key.
Do you want to stop the restore operation (Y/N)?
v Type N then press the Enter key.
This is your last chance...
If you reply "Y" the backup disk will be restored.
Are you sure you want to continue restore (Y/N)?
v Type Y then press the Enter key. The restore operation starts automatically.
During the restore, the NAS reboots. At the end of the restore operation, the
following message appears on the screen:
Restore Complete Normal operation resume.
MAP 0520 (continued)
5-26
2220 Setup and Service Guide
To Next Page
Loading...
