IBM 300 - Page 136

«4¬
Start Options
Startup Sequence
Keyboard Numlock State (ON)
Keyboard Speed (Fast)
Disketteless Operation (Disabled)
Keyboardless Operation Mode (Disabled)
Power-On Self-Test (Quick)
Power-On Logos (Enabled)
Option Keys Display (Enabled)
Network Boot F12 Option (Enabled)
Power On Status (Disabled)
Virus Detection (Disabled)
«5¬
Date and Time
Time HH/MM/SS
Date MM/DD/YY
«6¬
System Security
- Security Profile by Device
- Remote Administration
- Power-On Password
- Administrator Password
- Adapter ROM Security (No)
Secure IDE Devices and Diskette Drives
IDE Controller (Enable)
Diskette Drive Access (Enable)
Diskette Write Protect (Disabled)
Password to request before booting:
Removable Media Device (User)
Hard Disk Device (User)
Network Device (User)
Remote Administration
Information:
If the password prompt is set to “ON” it will be reset
when Remote Administration is set to ENABLE
- Remote Administration
Power-On Password
Enter your new power-on password twice.
Enter Power-On Password ( )
Enter Power-On Password Again ( )
Change Power-On Password
Delete Power-On Password
Password Prompt (Dual)
B-4 2220 Setup and Service Guide