– See Appendix B. Nways Administration Station Configuration / Setup Utility for
6563 Model 65U and use the Configuration/Setup Utility to check the date
and time of your NAS. Modify them if necessary.
– At the end of configuration, a message asks you if you want to save your
changes.
– Select YES and press the Enter key to start the system.
– Continue with Step 006.
006
– At the end of the boot, the Nways Switch Desktop window should appear.
Has the Nways Switch Desktop window appeared?
Yes No
007
– Restart problem determination, or call your support for help.
008
– Problem solved. Return the Nways Switch administration station to the customer.
Call the Network Support Center to inform them, follow their instructions, then go
to “Leaving Procedure” on page 5-30.
MAP 0500 (continued)
Chapter 5. Nways Switch Administration Station FRU and Display Exchange Procedures 5-17
To Next Page
Loading...
