Checkpoint Description Action/
Possible Failing FRU
E70C Create I/O backplane VPD (I2C problem) Go to “MAP 1540: Problem Isolation
Procedures” on page 124.
E70D Create VPD
1. Check for system firmware updates.
2. Call service support.
E70F Collect CEC VPD Go to “MAP 1540: Problem Isolation
Procedures” on page 124.
E7EE Delaying while waiting for power subsystem
VPD collection to be completed;
informational only
1. Check for system firmware updates.
2. Call service support.
E7FF Successful end of VPD creation Informational message. If the system hangs
here, go to “MAP 1540: Problem Isolation
Procedures” on page 124.
E800 RTAS initialization problem
1. Check for system firmware updates.
2. Call service support.
E841 Initializing RTAS/open firmware device tree
interface
1. Check for system firmware updates.
2. Call service support.
E842 Initializing RTAS/service processor interface
1. Check for system firmware updates.
2. Replace the CEC backplane
Location: U0.1-P1.
3. Call service support.
E843 Initializing RTAS/sensor interface
1. Check for system firmware updates.
2. Call service support.
E844 Initializing RTAS/time-of-day clock interface
1. Check for system firmware updates.
2. Replace the CEC backplane
Location: U0.1-P1.
3. Call service support.
E845 Initializing interface/sensor access
1. Check for system firmware updates.
2. Call service support.
E846 Initializing interface/sensor access
1. Check for system firmware updates.
2. Call service support.
E84F Initializing RTAS/operator panel interface
1. Check for system firmware updates.
2. Call service support.
E850 Initializing RTAS/cache interface
1. Check for system firmware updates.
2. Call service support.
E851 Initializing RTAS/hardware access
1. Check for system firmware updates.
2. Call service support.
E852 Initializing RTAS/PCI bus interface
1. Check for system firmware updates.
2. Go to “MAP 1540: Problem Isolation
Procedures” on page 124.
3. Call service support.
Chapter 4. Checkpoints 201
To Next Page
Loading...
