56 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
If you completed the initial setup, that wizard automatically redirects you to the IBM Storwize
V5000 Gen2 GUI. Otherwise, complete the following steps to complete the initial
configuration process:
1. Start the service configuration wizard by using a web browser on a workstation and point it
to the system management IP address that was defined in Figure 2-18 on page 54.
2. Enter a new secure password twice for the superuser user, as shown in Figure 2-22 and
click Log in.
Figure 2-22 Setup wizard: Password prompt
To Next Page
Loading...
Need help?
General