Chapter 2. Initial configuration 65
To set up Call Home, you need the location details of the IBM Storwize V5000 Gen2,
Storage Administrator details, and at least one valid SMTP server IP address as shown in
Figure 2-34.
Figure 2-34 Setup wizard: Email server details
If your system is under warranty or you bought a hardware maintenance agreement, we
advise you to configure Call Home to enable proactive support of the IBM Storwize V5000
Gen2.
To enter more than one email server, click the plus sign (
+) icon, as shown in Figure 2-34.
Then, click Apply and Next to commit.
Note: If you do not want to configure Call Home now, you can defer it using the
check-box in the GUI and come back to it later via Settings → Notifications.
To Next Page
Loading...
Need help?
General