Figure 94. Secure the FIB to the drive board
4. If needed, repeat steps â2â on page 81 and â3â on page 81 to replace the other FIB.
5. Replace the narrow metal cover, which is shown in Figure 95 on page 82, over the FIB assemblies.
The attachment screws are on each side of the chassis.
Figure 95. Replace the FIB cover
82
Storwize V7000 : Gen3 Quick Installation Guide for MTM 2076-724, 2076-U7B, 2076-12F, 2076-24F, and
2076-92F
To Next Page
Loading...
