Table 17. LED indicators on drives (continued)
Function Color Status Description
3 Fault Amber On A fault occurred on the
drive. The LED is turned
off when the drive is
removed and replaced.
Flash The drive is being
identiîłed, a fault might or
might not be detected.
Off The installed drive is
operating normally.
Figure 133 on page 119 shows the LEDs on a secondary expansion module.
Figure 133. LEDs on a secondary expansion module
1 Online indicator
2 Fault indicator
Table 18 on page 119 describes the meaning of the LEDs on each secondary expansion module.
Table 18. LED indicators on secondary expansion modules
Function Color Status Description
1 Power Green On The secondary expansion
module is receiving
power.
Flashing Not used.
Off The secondary expansion
module is not receiving
power.
2 Fault Amber On Not used.
Flash The secondary expansion
module is being identiîłed.
Off The secondary expansion
module is operating
normally.
Chapter 2. Installing the system hardware 119
To Next Page
Loading...
