Table 20. Supported expansion enclosure SAS drives
Description FRU part number
600 GB 15 K disk drive 01LJ061
1.2 TB 10 K disk drive 01LJ062
1.8 TB 10 K disk drive 01LJ063
6 TB 7.2 K Near-Line SAS disk drive 01LJ064
8 TB 7.2 K Near-Line SAS disk drive 01LJ065
10 TB 7.2 K Near-Line SAS disk drive 01LJ066
12 TB 7.2 K Near-Line SAS disk drive 01LJ179
1.6 TB 2.5-inch flash drive 01LJ067
3.2 TB 2.5-inch flash drive 01LJ068
1.92 TB tier 1 flash drive 01LJ069
3.84 TB tier 1 flash drive 01LJ070
7.68 TB tier 1 flash drive 01LJ071
15.36 TB tier 1 flash drive 01LJ072
Other expansion enclosure parts
Table 21 on page 122 summarizes the part numbers and feature codes for other parts. The values are the
same for all Storwize V7000 systems that support the 2076-92F expansion enclosure.
Table 21. Other expansion enclosure parts
Description FRU part number Comments
3 m 12 Gb SAS Cable (mSAS HD) 00AR317
6 m 12 Gb SAS Cable (mSAS HD) 00AR439
16A power cord C19/C20 2 m 39M5388
Enclosure 01LJ607
Note: Replaces
enclosure FRU P/N
01LJ112.
Includes the drive board, signal
interconnect board, and internal power
cables, in an otherwise empty
enclosure.
Rail kit 01LJ114
Front fascia (4U front cover) 01LJ116
Display panel assembly 01LJ118
PSU fascia (1U cover) 01LJ120 The fascia must be removed to access
the power supply units.
Power supply unit (PSU) 01LJ122 The expansion enclosure contains 2
PSUs. Each PSU requires a C19/C20
power cord.
122 Storwize V7000 : Gen3 Quick Installation Guide for MTM 2076-724, 2076-U7B, 2076-12F, 2076-24F, and
2076-92F
To Next Page
Loading...
