EasyManua.ls Logo

IBM System x3650 M5 - Page 412

IBM System x3650 M5
1010 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80030112-0601ffff Sensor [SensorElementName] has asserted. (SMM Mode)
Explanation: This message is for the use case when an implementation has detected a Sensor has asserted.
May also be shown as 800301120601ffff or 0x800301120601ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Replace the power supply with higher rated power.
2. Reduce the total power consumption by removing newly added or unused option like drives or adapters.
SMM Monitor :
8007000d-2582ffff Sensor [SensorElementName] has transitioned to normal state. (RAID Vol State)
Explanation: This message is for the use case when an implementation has detected a Sensor transition to the
normal state.
May also be shown as 8007000d2582ffff or 0x8007000d2582ffff
Severity: Info
Alert Category: Warning - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0518
SNMP Trap ID: 60
Automatically notify Support: No
User response: No action; information only.
80070101-0c01ffff Sensor [SensorElementName] has transitioned from normal to non-critical state. (Ambient
Status)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 800701010c01ffff or 0x800701010c01ffff
Severity: Warning
Alert Category: Warning - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 12
Automatically notify Support: No
User response:
1. Check the microprocessor installed is Intel E5-2690.
2. Reduce the ambient temperature under 27 Celsius degree.
80030112-0601ffff 80070101-0c01ffff
396
System x3650 M5 Type 5462: Installation and Service Guide

Table of Contents

Related product manuals