IBM x3630 M3 7377 - Page 117

Table 7. Integrated management module error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 4, “Parts listing, Type 7377 server,” on page 125 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Message Severity Description Action
Flash of %1 from %2
succeeded for user %3. (%1
= CIM_ManagedElement.
Element Name;
%2 = Web or LegacyCLI;
%3 = user ID)
Info A user has successfully updated
one of the following firmware
components:
v IMM main application
v IMM boot ROM
v UEFI firmware
v Diagnostics
v System power backplane
v Remote expansion enclosure
power backplane
v Integrated service processor
v Remote expansion enclosure
processor
No action; information only.
Hostname set to %1 by user
%2. (%1 =
CIM_DNSProtocolEndpoint.
Hostname; %2 = user ID)
Info A user has modified the host name
of the IMM.
No action; information only.
IMM clock has been set from
NTP server %1. (%1 =
IBM_NTPService.Element
Name)
Info The IMM clock has been set to the
date and time that is provided by
the Network Time Protocol server.
No action; information only.
IMM: Configuration %1
restored from a configuration
file by user %2. (%1 =
CIM_ConfigurationData.
ConfigurationName;
%2 = user ID)
Info A user has restored the IMM
configuration by importing a
configuration file.
No action; information only.
IMM Network Initialization
Complete.
Info An IMM network has completed
initialization.
No action; information only.
IMM reset was caused by
restoring default values.
Info The IMM has been reset because a
user has restored the configuration
to its default settings.
No action; information only.
IMM reset was initiated by
user %1. (%1 = user ID)
Info A user has initiated a reset of the
IMM.
No action; information only.
IMM Test Alert Generated by
%1. (%1 = user ID)
Info A user has generated a test alert
from the IMM.
No action; information only.
Chapter 3. Diagnostics 99