Icom IC-7300 HF Plus - D Canceling All Select Memory Channel Settings; D Select Memory Scan Operation; D Setting Select Memory Channel

10
SCANS
10-5
D Select Memory scan operation
1. Start the Memory scan.
L See steps 1 ~ 3 in “Memory scan operation” (p.10-4)
for details.
2. While scanning, touch [SEL No.] to select the
Select scan number.
L Each time you touch [SEL No.], “★1,” “★2,” “★3,” and
“★1,2,3” are alternately displayed.
 ★1: Channels specied as ★1 are scanned.
★2: Channels specied as ★2 are scanned.
★3: Channels specied as ★3 are scanned.
★1,2,3:
Channels specied as ★1, ★2, or ★3 are
scanned.
3. While scanning, touch [SELECT] to switch to the
Select Memory scan.
Blinks
Blinks
While Memory scanning
While Select Memory scanning
L While Select Memory scanning, “SELECT MEMORY
SCAN” blinks instead of “MEMORY SCAN.”
L Each time you touch [SELECT], the Memory scan
and the Select Memory scan are switched.
4. Touch [MEMO] to cancel the scan.
5. To close the SCAN screen, push
EXIT
.
Memory scan and Select Memory scan (Memory mode) (Continued)
D Setting Select Memory channel
1. Open the SCAN screen.
L See steps 1 ~ 2 in “Memory scan operation” (p.10-4)
for details.
2. Push
▲
or
▼
to select the desired Memory
channel to be set as the Select Memory channel.
3. Touch [SELECT] to set the Select scan number.
L Each time you touch [SELECT], “★1,” “★2,” “★3,” and
“(no icon)” are alternately displayed.
4. To close the SCAN screen, push
EXIT
.
Displayed
D Canceling all Select Memory channel
settings
1. Open the SCAN screen.
L See steps 1 ~ 2 in “Memory scan operation” (p.10-4)
for details.
2. Touch [SELECT] for 1 second.
• Opens the SELECT ALL CLEAR screen.
3. Touch the desired option to clear all Select
memory channel settings.
4. Touch [YES] to cancel the Select setting.
5. To close the SCAN screen, push
EXIT
.
Previous view