EasyManua.ls Logo

Icom IC-7300 HF Plus - General Specifications; Transmitter Specifications

Icom IC-7300 HF Plus
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
SPECIFICATIONS
16-2
D General
Frequency coverage (unit: MHz):
Receiver 0.030000 ~ 74.800000*
1
Transmitter 1.800000 ~ 01.999999*
2
3.500000 ~ 03.999999*
2
5.255000 ~ 05.405000*
2
7.000000 ~ 07.300000*
2
10.100000 ~ 10.150000*
2
14.000000 ~ 14.350000*
2
18.068000 ~ 18.168000*
2
21.000000 ~ 21.450000*
2
24.890000 ~ 24.990000*
2
28.000000 ~ 29.700000*
2
50.000000 ~ 54.000000*
2
70.000000 ~ 70.500000*
2
*
1
Some frequency ranges are not guaranteed.
*
2
Depending on the transceiver version.
Operating modes: USB/LSB (J3E), CW (A1A), RTTY (F1B), AM (A3E) and FM (F3E)
Number of memory channels: 101 (including 2 scan edges)
Antenna impedance: 50 Ω Unbalanced
Power supply requirement: 13.8 V DC (±15%)
Operating temperature range: –10°C to +60°C, +14°F to +140°F
Frequency stability: Less than ±0.5 ppm (–10°C to +60°C, +14°F to +140°F)
Frequency resolution: 1 Hz (minimum)
Power consumption:
Receive Standby 0.9 A
Maximum audio 1.25 A
Transmit Maximum power 21.0 A
Dimensions (projections not included): 240 (W)×94 (H)×238 (D) mm, 9.4 (W)×3.7 (H)×9.4 (D) in
Weight (approximately): 4.2 kg, 9.3 Ib
D Transmitter
Transmit output power:
HF and 50 MHz bands
SSB/CW/RTTY/FM 2~100 W
AM 1~25 W
70 MHz band*
2
SSB/CW/RTTY/FM 2~50 W
AM 1~12.5 W
*
2
Depending on the transceiver version.
Modulation system:
SSB P.S.N. modulation
AM Low power modulation
FM Reactance modulation
Spurious emission:
Harmonics Less than –50 dB (1.8~28 MHz)
Less than –63 dB (50 MHz band)
Less than –60 dB (70 MHz band)
Out-of-band emission Less than –40 dB (1.8~28 MHz)
Less than –60 dB (50 MHz band)
Less than –60 dB (70 MHz band)
Carrier suppression: More than 50 dB
Unwanted sideband suppression: More than 50 dB
Microphone impedance: 600 Ω
Previous view

Table of Contents

Related product manuals