4
RECEIVING AND TRANSMITTING
4-25
Operating RTTY (FSK) (Continued)
D Editing an RTTY memory
You can edit the characters in the RTTY memories.
You can save and transmit 8 RTTY memories for
often-used RTTY messages.
Each RTTY memory contains up to 70 characters.
1. Open the RTTY MEMORY screen.
» DECODE > TX MEM > EDIT
2. Touch the memory for 1 second.
(Example: RT3)
RTTY MEMORY screen
3. Touch “Edit.”
4. Touch [CLR] until the characters are cleared.
QUICK MENU screen
5. Enter the desired characters, and then touch
[ENT] to save.
LSee “Keyboard entering and editing” (p. 1-8) for details.
6. To close the RTTY DECODE screen, push
several times.
To Next Page
Loading...
