Icom IC-7300 HF Plus - Voice TX Memory Transmission

7
VOICE TX MEMORY OPERATION
7-4
TIP:
When an external keypad (
pp. 2-2, 12-8) is connected,
you can transmit the recorded content.
• When pushing one of [S1] to [S4] on the external
keypad, the recorded content in T1 to T4 is transmitted
once.
• When holding down a key for 1 second, the recorded
content is repeatedly transmitted.
Transmitting a Voice memory content
You can transmit the Voice TX memory contents
once or repeatedly. This is useful for transmitting
your call sign and contest name in some contests, or
repeatedly calling CQ.
D Transmitting
Transmits the prerecorded content. (p. 6-2)
1. Open the VOICE TX screen in a Voice mode.
L(Voice mode: SSB, AM or FM modes).
MENU
»
VOICE
2. Touch the desired Voice memory key [T1] ~ [T8].
• Transmits the recorded content once.
InformationL
• The transceiver automatically transmits.
• The Memory Timer counts down.
• The transceiver automatically returns to receive
when all of the recorded content in the memory is
transmitted.
3. To close the VOICE TX screen, push
EXIT
.
• Repeatedly transmits the recorded content.
InformationL
• The transceiver automatically transmits.
• The Memory Timer counts down.
• “
” is displayed while repeatedly transmitting.
• Repeatedly transmits the recorded content for up to
10 minutes, at the interval specied in the “Repeat
Time” item of the VOICE TX SET screen (p. 7-6).
• After 10 minutes have passed, and all of the
recorded content in the memory is transmitted, the
transceiver automatically returns to receive .
• When a signal is received while in the transmit
interval, the transceiver pauses the next
transmission until the signal disappears. However,
if the squelch is set to open, the transceiver
repeatedly transmits following the repeat interval
even signals are received.
3. To close the VOICE TX screen, push
EXIT
.
D Repeatedly transmitting
1. Open the VOICE TX screen in a Voice mode.
L(Voice mode: SSB, AM or FM modes).
MENU
»
VOICE
2. Touch the desired Voice memory key [T1] ~ [T8]
for 1 second.
This icon
blinks while
transmitting.
This icon
blinks while
transmitting.
TIP: How to cancel a Voice TX transmission
• Touch any keys other than [TX LEVEL] on the VOICE
TX screen
• Push
EXIT
,
V/M
,
▲
, or
▼
• Touch the frequency’s MHz digits or the Memory
channel number
• Turn OFF the transceiver
Previous view