Icom IC-7300 HF Plus - D Adjusting the VOX Function; D Turning on the VOX Function; VOX Function

4
RECEIVING AND TRANSMITTING
4-10
VOX function
D Turning ON the VOX function
1. Set the operating mode to SSB, AM or FM.
(Example: USB)
2. Push
VOX/BK-IN
to turn ON the VOX function.
L Pushing
VOX/BK-IN
again turns OFF the VOX
function.
Displayed
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function enables a hands-free operation.
D Adjusting the VOX function
Before using the VOX function, adjust the following
items.
• VOX GAIN
• ANTI VOX
• DELAY
• VOICE DELAY
1. Hold down
VOX/BK-IN
for 1 second.
• Opens the VOX menu.
2. Touch the adjusting item.
(Example: ANTI VOX)
3. Adjust the selected item.
L Adjust to the point where the transceiver does not
switch to transmit due to the sound from the speaker
or other devices.
L Touching VOICE DELAY selects “SHORT,” “MID,”
“LONG” or “OFF.”
VOX GAIN (Default: 50%)
Adjust the transmit/receive switching threshold level
to between 0% and 100% for VOX operation. Higher
values make the VOX function more sensitive to your
voice.
ANTI VOX (Default: 50%)
Adjust the ANTI VOX level to between 0% and 100%
to prevent unwanted VOX activation from the speaker
or other sounds. Higher values make the VOX function
less sensitive.
DELAY (Default: 0.2s)
Adjust the DELAY to between 0 and 2.0 seconds, for
a convenient interval for normal pauses in speech
before returning to receive.
VOICE DELAY (Default: OFF)
Set the VOICE DELAY to prevent cutting off your rst
word or words when switching to transmit.
Select “SHORT,” “MID,” “LONG” or OFF.
Rotate
Push
Previous view