Icom IC-i7410 - D Editing a Memory Keyer

40
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D Editing a memory keyer
The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW key codes
for often-used CW sentences, contest serial numbers
or a count up trigger. The total capacity of the memory
keyer is 70 characters per memory channel.
• Programming contents
q In the CW mode, p ush [MENU] to display the “M1”
screen (Menu 1).
w Push [KEY](F-4) to display the “KEY” screen (Mem-
ory Keyer).
e Push [EDT](F-3) to display the “EDT” screen (Keyer
Edit).
 •The memory keyer content of Channel 1 (M1) is dis-
played.
r Push [F-1] one or more times to select the memory
keyer channel to be edited.
t Rotate [DIAL] to select a character, or push the
keypad to input a number.
 •Push [DEL](F-4) to delete theselectedcharacter or
number.
 •Push[SPC](F-5)toinputaspace.
 •Anerrorbeepsoundswhenyoutrytoinputmorethan
70 characters. To delete a character or number, push
[Ω](F-2) or [≈](F-3) to select it, then push [DEL](F-4) to
delete.
Selectable characters
A to Z ⁄ ? ^ . , @ ✱
y Push [Ω](F-2) to move the cursor backward, or push
[≈](F-3) to move the cursor forward.
u Repeat steps t and y to program up to 70 char-
acters memory keyer contents.
i Push [MENU] to save, and return to the “KEY”
screen.
o Push [MENU] again to return to the “M1” screen.
NOTE:
“^” is used to transmit a string of characters with no
inter-character space. Put “^” before a text string such
as ^AR, and the string “ar ” is sent with no space.
“✱” is used to insert the CW contest serial num-
ber. The serial number automatically advances
by 1. This function is available for only one mem-
ory keyer channel at a time. “✱” is used in memory
keyer channel M2 by default.
Pre-programmed memory keyer contents
Memory keyer
channel
Contents
M1 CQ TEST CQ TEST DE JA1 JA1 TEST
M2
UR 5NN✱ BK
M3 CFM TU
M4 QRZ?
Input a space
Delete a character
Move cursor forward
Move cursor backward
Select M1 to M4
Ω≈ DEL SPC
EDT
CQ TEST CQ TEST DE
M1
Ω≈ DEL SPC
EDT
TU DE JA3YUA TEST
M3
Ω≈ DEL SPC
EDT
QSL TU DE JA3YUA
M3
Ω≈ DEL SPC
EDT
UR 5NNM BK
M2
Ω≈ DEL SPC
EDT
CFM TU
M3
Ω≈ DEL SPC
EDT
QRZ?
M4
•M2defaultindication
•M3defaultindication
•M4defaultindication
Example display— Inputting “QSL TU
DE JA3YUA TEST” into the memory keyer
channel 3 (M3).
When inputting an asterisk, the
counter is incremented by 1.