Icom IC-i7410 - Frequency Calibration (Approximate)

91
SET MODE
10
TBW(MID) L 9. (Default: 300)
(Mode: SSB)
Set the lower cut-off frequency of the transmission
passband width for your mid setting to 100, 200, 300
or 500 Hz.
TBW(MID) H 10. (Default: 2700)
(Mode: SSB)
Set the higher cut-off frequency of the transmission
passband width for your mid setting to 2500, 2700,
2800 or 2900 Hz.
TBW(NAR) L 11. (Default: 500)
(Mode: SSB)
Set the lower cut-off frequency of the transmission
passband width for your narrow setting to 100, 200,
300 or 500 Hz.
TBW(NAR) H 12. (Default: 2500)
(Mode: SSB)
Set the higher cut-off frequency of the transmission
passband width for your narrow setting to 2500, 2700,
2800 or 2900 Hz.
■ Tone Control Set mode description (Continued)