Icom IC-i7410 - AGC Function

49
4
RECEIVE AND TRANSMIT
AGC TBW SCP
M1
[DIAL][AM/FM][AF][MIC]
Band keys
[TRANSMIT] TX indicator
Appears
■ Operating AM/FM
q Select the desired band. (p. 25)
w Push [AM/FM] to select the AM or FM mode.
 •Ifdesired,afterAMorFMisselected,holddown[AM/
FM] for 1 second to select the data mode.
e Rotate [DIAL] to tune a desired signal.
 •TheS-meterdisplaysthereceivedsignalstrength.
 •Thetuningstepcanbechangedinthetuningsteppro-
gram mode. (p. 27)
r Rotate the [AF] control to adjust the audio to a com-
fortable listening level.
t Push [PTT] on the microphone to transmit (or
[TRANSMIT] on the transceiver).
 •TheTXindicatorlightsred.
y Speak into the microphone at your normal voice
level.
 •Rotatethe[MIC]controltoadjustthemicrophonegain
in this step, if necessary.
u Release [PTT] to receive (or push [TRANSMIT]
again).
Convenient Receive functions
•Preampandattenuator(p.55)
•TwinPBT(PassbandTuning)*(p.59)
•AGC(AutoGainControl)(p.56)
•NoiseBlanker(p.60)
•NoiseReduction(p.61)
•Notchlter(p.61)
•VSC(VoiceSquelchControl)(p.76)
*AM only
Convenient functions for transmit
•SpeechCompressor(p.64)
•VOX(VoiceOperatedTransmit)(p.62)
•Transmitqualitymonitor(p.65)
•Audiotonecontrol(p.90)
Appears
• AM mode
• FM mode
Appears
√ 1 ∫ 2125
SET
RTTY Mark Freq
√ 1 ∫ 2125
SET
RTTY Mark Freq