WSB-9454 CPU Card
Page 119
Suspend mode [Auto]
Use the Suspend Mode option to specify the sleep state the system enters when it is not
being used.
Auto
D
EFAULT The OS selects the sleep state when then system is not
being used.
S1 (POS)
The system enters S1(POS) sleep state. The system
appears off. The CPU is stopped; RAM is refreshed; the
system is running in a low power mode.
S3 (STR)
The system enters a S3(STR) sleep state. The CPU has
no power; RAM is in slow refresh; the power supply is in a
reduced power mode.
Repost Video on S3 Resume [Yes]
Use the Repost Video on S3 Resume option to enable video repost support, allowing the
video BIOS to be initialized when coming out of S3 state.
Yes
D
EFAULT The video BIOS will be initialized when coming out of S3
state
No
The video BIOS will be initialized when coming out of S3
state
To Next Page
Loading...
Need help?
General
