WSB-9454 CPU Card
Page 139
5.5.3 Removable Drives
Use the Removable Drives menu (BIOS Menu 18) to specify the boot sequence of the
available FDDs. When the menu is opened, the FDDs connected to the system are listed
as shown below:
1st Drive
NOTE:
Only the drives connected to the system are shown. For example, if
only one FDD is connected only “1st Drive” is listed.
The boot sequence from the available devices is selected. If the “1st Drive” option is
selected a list of available removable drives is shown. Select the first drive the system
boots from. If the “1st Drive” is not used for booting this option may be disabled.
To Next Page
Loading...
Need help?
General
