WSB-9454 CPU Card
Page 70
Ground yourself to remove any static charge before touching your WSB-9454 .
You can do so by wearing a grounded wrist strap at all times or by frequently
touching any conducting materials that is connected to the ground.
Handle your WSB-9454 by its edges. Do not touch the IC chips, leads or
circuitry if not necessary.
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.
4.3.2 Checklist
When you unpack the WSB-9454, please make sure that your package contains the
following items.
1 x WSB-9454 single board computer
1 x Mini jumper pack
1 x ATA 66/100 flat cable
1 x Dual RS-232 cable
2 x SATA cables
1 x SATA power cable
1 x Keyboard/ PS2 mouse Y cable
1 x USB cable
1 x Utility CD
1 x QIG (quick installation guide)
If one or more of these items are missing, please contact the reseller or vendor you
purchased the WSB-9454 CPU card from and do not proceed any further with the
installation.
To Next Page
Loading...
Need help?
General
