WSB-9454 CPU Card
Page 15
2.4.3 Digital Visual Interface (DVI)
The DVI interface on the WSB-9454DVI-R10 is controlled by the Silicon Image SiI362 chip
and has the following features.
Incorporates the latest PanelLink
®
technology with support display resolutions
ranging from VGA to UXGA (1600x1200) in a single link interface.
Supports Intel
®
Serial Digital Video Output (SDVO) technology
I2C slave interface for access to internal registers
Dual I2C pass-through interfaces for host I2C access of EDID (via DDC) and
configuration EEPROM (on ADD2 Card)
Low-voltage input signaling interface: 175mV to 1.2V
Monitor detection supported through Hot Plug or Receiver Sense
Cable distance support greater than 10 meters
DVI 1.0 compliant, with significantly greater margin than competitive solutions
48-pin LQFP package without EEPROM interface (motherboard applications)
To Next Page
Loading...
Need help?
General
